PIECAL 334 Loop Calibrator

Improvements over 334 milliamp loop calibrators from other manufacturers include better longer term stability, accuracy, reliability & ruggedness plus improved battery life. PIE Model 334 is the perfect replacement for your worn out milliamp calibrators!

Backlit Display with Larger Digits
Easier to read in dark areas of the plant
More Resistant to Accidental Damage
Rubber Boot and Stronger Switches
Separate Battery Compartment with 4 “AA” Batteries
No more removing housing with screwdriver to replace three expensive 9V batteries. Calibration seals remain intact.
Calibrate More Devices Between Battery Changes
Drives more loop instruments at 24 Volts (up to 1200 Ohms) for entire battery life. The Altek 334 output voltage drops as the batteries run down.

Calibrate Milliamp Instruments
Source 0.00 to 24.00 mA & -25.0 to 125.0% of 4-20 mA
Read 0.00 to 52.00 mA
Read -99.99 to 99.99 V
Simulate 2-Wire Transmitters; Power & Read 2-Wire Transmitters
Calibrate with Confidence
Accurate to ±0.025% of Span at 4.00 & 20.00 EZ-CHECK outputs
Use in the Plant, Field or Shop
Includes Rubber Boot and Attached Test Leads; Low profile switches resist accidental damage
Simple Battery Changes
Separate compartment for no-tool battery changes with four inexpensive “AA” batteries
Optional Accessories
AC Adaptor 120V (020-0101); 240V (020-0100); Deluxe Hands Free Carrying Case (020-0211); NiMh Batteries & Charger 100 to 240 VAC (North American Plug)/ (020-0103)

PIECAL 334 Loop Calibrator Datasheet